Special Applications
An Overview of Hochiki's Specialist Fire Detection Ranges.
An Overview of Hochiki's Specialist Fire Detection Ranges.
These ranges have been designed to provide fire detection or other types of protection in unique environments, beyond that offered by our core fire detection product range. The products use unique technologies that enable them to operate either in extreme situations or within specific locations.
LEAKalarm,is an innovative new fully monitored alarm and detection system providing protection from the greatest risk to buidlings and managed facilities.Statistics show that the most likely cause of insurance claims in blocks of flats, hotels, retail premises and commercial buildings is water damage.
Hochiki's Marine approved Intelligent and Conventional products have been designed around the existing world-proven ESP and CDX ranges and have been approved for marine use by both Germanischer Lloyd and LPCB, to the MED approval scheme.
Ideal for use on ships, oil and gas platforms, wind farms and other similar applications the Hochiki Europe Marine Range incorporates the same world proven reliability and quality as its land-based equipment.
The Linear Heat Detection Cable (LHDC) System from Hochiki is designed to provide early detection of fire and overheating in circumstances where other forms of detection would not be viable, either due to inability to sustain the environmental requirements or through prohibitive costs.
Extensive single zonal lengths of the specially designed LHDC may be installed with the ability to trigger alarms for hot spots occurring on very small sections of the overall cable and, providing the LHDC has not been subjected to excessive temperatures, the alarm condition can be reset at the zonal controller.
This is particularly useful when carrying out annual maintenance utilising the proprietary one metre Test Oven.
VESDA (Very Early Smoke Detection Apparatus) is a very early warning aspirating smoke detection solution. With continuous air sampling, it provides the earliest possible warning of an impending fire hazard. VESDA aspirating smoke detectors buy the critical time needed to investigate an alarm and initiate an appropriate response to prevent injury, property damage or business disruption
FIRElink range of high-sensitivity air sampling equipment consists of detectors and sampling pipe accessories.
FIRElink system is adaptable to a broad range of environments and applications. From small to very large areas, the system can be designed to fit almost any particular environment, such as Clean Rooms, Computer Rooms, Data Centres, Prisons, Cold Storage, and Large Storage Facilities.
DCD-AE3M
Marine Approved Conventional Combined Rate of Rise & Fixed Temperature Heat Detector (60°C)
DCD-AE3M is a Marine Approved Rate of Rise Heat Detector with a 60°C fixed temperature element using a thermistor and linearising circuit to provide an accurate linear response Heat Detector
DCD-CE3M
Marine Approved Conventional Combined Rate of Rise & Fixed Temperature Heat Detector (90°C)
DCD-CE3M is a Marine Approved Rate of Rise Heat Detector with a 90°C fixed temperature element using a thermistor and linearising circuit to provide an accurate linear response Heat Detector.
DRD-EM
Marine Approved Conventional Flame Detector
DRD-EM is a marine-approved flame detector designed for internal use to detect large flames.
SOC-E3NM
Marine Approved Conventional Photoelectric Smoke Detector
SOC-E3NM is a Marine Approved Photoelectric Smoke Detector, which is fully compatible with the majority of existing Conventional Marine systems.
YBN-R/6M
Marine Approved Conventional Mounting Base
YBN-R/6M is a Conventional Detector Mounting Base approved for marine applications by GL (Germanischer Lloyd) and is associated with the CDX Range of Marine Approved Detectors.
Enquire now
To contact us please fill out the form below